SELL PRODUCT
More Information
The patented cutter heads with continuous cutting are specially designed for mounting on mini-excavators. Their innovative system allows whole width of the attachment to cut without gaps at center or side footprints. Ideal for finishing flat surfaces and trenches.
Quiet and precise in the work area, they do not intrude on the surrounding area. Versatile and high-performing, they can be utilized for crushing roots and tree trunks, milling asphalt and concrete, milling plaster (thanks to lateral disks there is perfect control of the layer removed).
ADVANTAGES
• Versatile
• Low noise output
• High precision
• Continuous cutting
|
TECHNICAL DATA |
|
TFC 50 |
TFC 100 |
TFC 400 |
|
|
Width (cutting profile) |
mm |
370 |
480/430 (*) |
520/420 (*) |
|
|
Drum diameter (cutting profile) |
mm |
230 |
260 |
450 |
|
|
Weight (1) |
Kg |
90 |
170 |
500 |
|
|
Recommended excavator weight (2) |
Ton |
1,2-3,0 |
2,5-4,5 |
6-14 |
|
|
Required oil flow (3) |
l/min |
20-40 |
30-60 |
65-115 |
|
|
Max. required oil pressure (4) |
BAR |
250 |
300 |
300 |
|
|
Max. torque |
at 250 BAR |
Nm |
600 |
- |
- |
|
Max. torque |
at 300 BAR |
Nm |
- |
1060 |
3900 |
|
Max. cutting force |
at 250 BAR |
N |
5100 |
- |
- |
|
Max. cutting force |
at 300 BAR |
N |
- |
8100 |
17500 |
|
(*) Narrow drums for increased penetration.
*Technical modifications may vary without prior notice. |
|||||
Related Models
