Easy and versatile mounting

Direct Mount frame: The pin-on type frame is designed to accept a variety of slip-fit bushings and pins, resulting in versatile installation on any carrier that does not require OEM's pin-to-pin distance.

 

Self – aligning bearing

Shelf-aligning double row spherical roller bearing provides a long service lift to rotating components.

 

Single hose block

All hoses are routed within the frame and connected to a mono hose block located on the back. It keeps the hoses from easy damage.

 

Easy maintenance

All gears fittings are located for easy access.

 

Cushion rubber

Specially designed cushion rubbers protect machine and operator from vibrations.

 

Cross-check valve as standard

Built- in cross check valve within motor protects the motor and bearing from damage caused by abrupt shutdown of hydraulic flow. And it also eliminates the need for a case drain.

 

Heavy duty gear motor

Heavy duty and high efficiency gear motor with splined shaft and high pressure motor seals prevent easy damage caused by pressure shock during startup and shutdown.

 

Valve pack as standard

Flow control valve (Priority flow divider) regulates hydraulic in – flow to the motor and prevents it from over-speeding.  Thus, the compactor can be installed on carrier not equipped with a flow control valve on its auxiliary plumbing.

 

SPECFICATION		EPC05	EPC10	EPC15	EPC20	EPC30
Impulse force	tonnes	2.1	4.0	6.4	11.2	17.3
Weight 1)
Adapter mount type	kg	260	430	689	1,094	1,502
Direct mount type
Height(H)
Adapter mount type	mm	650	640	750	840	943
Direct mount type	mm	695
Width(W)	mm	320	610	740	860	943
Dimension	mm	320x745	610x900	740x1,050	860x1,200	1,000x1,300
Compaction area	m²	0.24	0.55	0.78	1.03	1.30
Oil flow required	lpm	45-65	50-120	80-170	110-200	160-250
Max. cycle per minute	rpm	2,100	2,000	2,000	2,000	2,000
Operating pressure
Free load	bar	30-50	30-50	30-50	30-50	30-50
With load	bar	100-220	100-138	100-138	100-138	100-138
Applicable carrier weight	tonnes	4-6	6-10	11-16	17-25	26-40
1) Including standard mounting adapter, excluding hydraulic hoses, fitting and mounting pins.