The Cangini auger enables precise, rapid operation. The high quality hydraulic motor and the use of high-strength steel make this attachment reliable and durable, ideal for excavators from 1.2 to 14 ton.

Hydraulic and bi-directional, it is equipped with an epicyclic reducer on all models. Made in Italy, this reducer guarantees high reliability and a long working life, optimising machine performance. Compact in design, it is enclosed in a steel case protecting it from shocks.

The double articulated joint, used in fixed coupling or with an adapter, is useful to make perpendicular drillings in any slope degree. The single articulated joint uses the arm of the excavator as a second joint. In this configuration, the equipment is more compact and lighter.

The three drill bit options allow for the use of the auger in soils of different consistencies. The Standard bit is suited to medium-low consistency soils. The Medium bit is able to drill mixed soils of medium-high consistency. The Rock bit works in the most difficult and hard soil conditions, with high percentage of rocks.

With a standard length of 1000 mm, the extension boom increases the drilling depth. It is also possible to customize the extension length according to drilling depth needs.

 

	TONS	1,2 - 1,8				1,8 - 4,0					4,0 - 7,5				7,5 - 14,0
		MT15				MT20					MT45				MT70
A	MM	270				300					300				370
B	MM	500				620					730				950
W/O Coupler	KG	75				130					160				250
Min-Max Oil Flowrate	L/MIN	25/35				30/60					50/75				60/90
Pressure	BAR	175				200					200				250
Max Torque	N/M	1600				2200					6000				10.000
Hex Key	HEX MM	50  (MT15-MT20-MT45)									70  (MT70)
ØMM		150	200	250	300		350	400	500	600	150	200	250	300		350	400	500	600
WIDTH MM		1000	1000	1000	1000		1000	1000	1000	1000	1000	1000	1000	1000		1000	1000	1000	1000