SELL PRODUCT
More Information
Simex consistently meets users’ demands, delivering them the best solutions to solve even the most complex application challenges. The planers for working under guard rails and planers for rail tracks are further proof of this commitment.
PL SG
Intended for mounting on front loaders and skid steer loaders. Designed to remove layers of asphalt or concrete under the guard rail. Adjustable milling depth. Conveyor belt version available for removing material from trench. Interchangeable milling drums in different widths available on request.
TECHNICAL DATA |
|
PL SG |
Standard drum width |
mm |
350 |
Depth |
mm |
0-150 |
Depth adjustment |
|
Mechanical/hydraulic optional |
Side shift |
|
Hydraulic |
Operating weight (1) |
Kg |
715 |
Operating weight with conveyor belt (*)(1) |
Kg |
910 |
Required oil flow |
l/min |
75-140 |
Max. required oil pressure |
BAR |
300 |
*Simex does not accept responsibility or liability for the information provided. *Technical modifications may vary without prior notice. |
PL RAIL
Studied for creating one or two small trenches at sides of rail tracks to be filled later with sound insulating material. Fitted with two guide wheels positioned at front and rear of milling disks that run on the rail to guarantee maximum precision.
Wheels available in different forms and sections for different rail profiles.
Interchangeable milling disks in different widths available on request.
TECHNICAL DATA |
|
PL RAIL |
Disk width |
mm |
30-40-50-60 |
Depth |
mm |
0-70 |
Depth adjustment |
|
hydraulic |
Side shift |
|
|
Tilt |
|
|
Operating weight (1) |
Kg |
1015 |
Required oil flow |
l/min |
75-115 |
Max. required oil pressure |
BAR |
300 |
*Technical modifications may vary without prior notice. |
Related Models